• plyndecor@gmail.com
  • +91 7042331199, 7042331166

Adhesive

Plywood is made by glueing several layers of wood veneer (thin sheets of wood) over each other with the grain pattern alternating at right angles in every subsequent layer. During the plywood manufacturing process, the individual layers of veneer are first obtained by rotary-cutting a log. For this the timber logs are rotated about their longitudinal axis, while a cutter peels the log at the set thickness (each layer is usually less than 2.5 mm in thickness). Later on, adhesives are spread on these veneers using a glue-spreader machine. The machine helps in achieving a uniform glue spread. After this the layers are placed upon each other and strongly pressed together using a hot-press machine. The high temperature and pressure created by the machine, ensures that the adhesive fully cures, thus firmly bonding the layers to each other. The number of layers in each plywood sheet can vary (could be 3-ply, 5-ply ... 13-ply etc.) depending on the requirement.

Brands

Our Brands

Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image
Awesome Brand Image